توضیحات
بخور سرد آلپکس مدل MH-506
دستگاه بخور سرد «آلپکس» (ALPX) مدل «MH-506» دستگاهی با مخزن بزرگ و طراحی متفاوت است. ALPX MH-506 دارای مخزن 4.5 لیتری آب است که از بیرون نمیتوان داخل آن را مشاهده کرد. طراحی دستگاه بهگونهای است که عرض کمی دارد و از دو رنگ مشکی و سفید در ساخت آن استفاده شده است. جلوی دستگاه دکمهی چرخشی آن دیده میشود که برای تنظیم شدت بخار استفاده میشود. حداکثر شدت بخار دستگاه 350 میلیلیتر در ساعت است.
اگر دستگاه با این شدت بخار کار کند، تقریباً 12 ساعت طول میکشد تا آب مخزن تمام شود. هنگام تمام شدن آب مخزن مبدل دستگاه بهطور خودکار خاموش میشود و چراغ نشانگر جلوی دستگاه روشن میشود. زیر مخزن دریچهای قرار دارد که کاربرد سهگانه دارد. این دریچه علاوه بر این که برای پر کردن مخزن استفاده میشود، خروجی آب نیز است و نقش فیلتر ضد رسوب را نیز ایفا میکند. فیلتر موجود در دستگاهفیلتری که به دریچه وصل است دارای دانههای سرامیکی بوده که مواد معدنی موجود در آب را جذب میکند. این فیلتر را میتوان از دریچه جدا کرده و شست و یا تعویض کرد. هنگامیکه 4.5 لیتر آب داخل مخزن ریخته شود، وزن آن زیاد میشود. جلوی مخزن دستگیرهای قرار دارد که حمل آن را آسانتر میکند. دهانهی خروجی بخار دارای نازلی است که میتوان آن را چرخاند و جهت خروج بخار را تعیین کرد. البته میتوان این نازل را از روی مخزن برداشت تا بخار از روی دستگاه پایین بریزد. توان مصرفی دستگاه 30 وات است. در صورت وجود رسوب روی مبدل اولتراسونیک، باید چند قطره سرکه داخل آن ریخت و توسط برسی که زیر مخزن تعبیه شده آن را تمیز کرد.
ALPX – MH-506 Cool Mist HumidifierDescription ALPX Cold Incinerator Model “MH-506” is a large tank with different design and design. The ALPX MH-506 has a 4.5 liter water tank that cannot be viewed from outside. The device is designed to be lightweight and has two colors of black and white. In front of the machine is a rotary knob that is used to adjust the vapor intensity. The maximum vapor pressure of the device is 350 ml per hour. If the machine operates at this vapor intensity, it will take approximately 12 hours for the tank to run out of water. When the water in the tank is run out, the device automatically turns off and the front indicator light turns on. Beneath the tank is a triple-use valve. In addition to being used for tank filling, the valve also has a water outlet and plays the role of an anti-fouling filter. Filter on deviceThe filter attached to the valve has ceramic grains that absorb minerals in the water. This filter can be removed from the valve, washed or replaced. When 4.5 liters of water are poured into the tank, it weighs. In front of the handle is a handle that makes it easier to carry. The steam outlet has a nozzle that can be rotated to determine the steam outlet. Of course, the nozzle can be removed from the tank to let steam drop down. Power consumption is 30 watts. In case of deposition on the ultrasonic converter, a few drops of vinegar should be poured in and cleaned by a brush placed under the tank. In short, the Alpine MH-506 Cold Incubator has a 4.5-liter tank, a vapor pressure control knob, a maximum vapor pressure of 350 ml per hour, a rotary nozzle, a front handle, an anti-fouling filter and a 30 watt filter. |
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.